Filter
Top Products
1-2
LS 2106 Product Reference Guide
complete line of Symbol Technologies portable terminals and the full range of
Symbol and OmniLink
TM
interface controllers.
t
LS 2104 - With a simple cable change, this scanner is compatible with:
s
RS 232C asynchronous terminals
s
Synapse
TM
“Smart Cables”, which allow you to connect to:
s
Wand Emulation terminals
s
IBM 4683/4, 4693/4 series of terminals
All leading OCIA terminals, including NCR, Nixdorf, and ICL terminals.
s
Dual RS-232 Hosts
s
Popular OCR terminals, such as Fujitsu and ICL.
t
LS 2106 - The LS 2106 scanner is a keyboard “wedge” interface which adds efficient,
reliable bar code reading to your PS/2 or AT/XT terminal. Since entered scan data is
transmitted as keystrokes, no software changes to the host system are necessary. The
scanner contains on-board discrete keyboard wedge communications for connecting
to asynchronous terminals and host systems. It can also accommodate any of the
Synapse™ “Smart Cables” which allows you to connect to a wide variety of host
systems. Some installations require one cable; others require additional adapters
between the keyboard, the PC, and the y-cable.
All of the LS 2100 series scan automatically at the rate of 36 scans per second. For decode
capability, see
Technical Specifications
on page 3-3.
Audience
The intended audience for this manual is personnel performing installation/setup and
programming of LS 2106 scanners.
Unpacking
Remove the LS 2106 from its packing and inspect it for damage. If the scanner was damaged
in transit, call the Symbol Support Center at one of the telephone numbers listed on page x.
KEEP THE PACKING
. It is the approved shipping container and should be used if you ever
need to return your equipment for servicing.