![](http://pdfasset.owneriq.net/8/27/82702b12-a866-436e-a711-19a7eca00d42/82702b12-a866-436e-a711-19a7eca00d42-bg8.png)
1-3
Setting Up the LS 2106
Setting Up the LS 2106
Installing the Cable
Insert the cable into the receptable on the bottom of the scanner, as shown below:
Figure 1-2. Installing the Cable
Switching Cables
Different cables are required for different hosts. To change the scanner cable:
1. Press the tab on the cable with a small screwdriver.
2. Pull the cable out of the receptacle on the bottom of the scanner.
3. Insert a new cable in the receptacle. Press the cable into the receptacle until you hear
a click.