5-78
LS 400Xi Product Reference Guide
Pause Duration
This parameter allows a pause to be inserted at any point in the data transmission. Pauses are
set by scanning a two-digit number (i.e., two bar codes), and are measured in 1/10 second
intervals. For example, scanning bar codes “0” and “1” inserts a 1/10 second pause; “0” and
“5” gives you a 1/2 second delay. Numeric bar codes begin on page 5-93. If you make an
error or wish to change your selection, scan DATA FORMAT CANCEL on page 5-81.
PAUSE DURATION