Filter
Top Products
4-2
P470/370 RF Scanner Product Reference Guide
Removing the Battery
1. Slide the release latch down using center indent and remove the cover.
Figure 4-1. Removing the Battery Compartment Cover
2. Slide the battery toward the bottom of the scanner and then pull the bottom of the
battery back and out of the scanner.
Figure 4-2. Pulling the Battery Out
Replacing the Battery
1. Place the top portion of the battery (curved side up, contacts toward top) into the
scanner and then slide it up the handle.
2. Replace the battery compartment cover.
3. Slide the release latch up to secure the cover in place.
Battery
Compartment
Cover
Battery
Release
Latch