These instructions apply to WS 5000s with the Type value set to Primary. If this WS 5000 is
configured as Standby, no Access Ports will be adopted and no policies will be applied.
To change the Type setting:
1. From the toolbar, select System Settings → Standby Management…
2. Click Primary for the Wireless Switch Mode selection.
3. Click Apply, then click Close.
The main screen should now show the Type as Primary.
To create a new WLAN and a security policy:
1. On the main WS 5000 window, select the Default Wireless Switch Policy from the tree
view on the left panel of the main screen.
2. Click Properties on the upper right corner of the main screen. The Wireless Switch
Policy Manager screen appears.
3. From the Wireless Switch Policy
Manager screen, click Create.
The Create a New Wireless Switch
Policy Wizard screen appears.
4. On the Create a New Wireless S
Policy Wizard screen, enter a Name
and (optional) Description for the
Wireless Switch policy. In this
example, the Name is QSG Wireless
Switch Policy and the Description is
the First wireless switch policy. Click
Next to display the Wireless Switch
Policy screen.
witch
7