Filter
Top Products
SysKonnect SK-9Exx/9Sxx Gigabit Ethernet Server Adapters
Windows 19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit
Ethernet Server Adapter Family supporting Windows 98 Second Edition (Windows 98 SE). This
driver only supports Windows 98 SE and Windows Me. Due to the plug & play facility of
PCI Express resp. PCI/PCI-X, Windows 98 SE is able to find, identify, and configure an adapter au-
tomatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot Windows 98 SE.
Windows 98 SE detects the SysKonnect SK-9Exx/9Sxx Adapter as “PCI Ethernet Controller”
during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click N
EXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box S
EARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click N
EXT.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard disk).
6. Select the checkbox S
PECIFY A LOCATION.
7. Type the path to the driver, e.g. e:\SK-9Exx\Windows\Win98SE, where “e” is the designa-
tion of the CD-ROM drive on your system.
8. Click N
EXT.
The window “Location of driver” is displayed.
9. Click N
EXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
10. Click F
INISH.
11. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit
Ethernet Server Adapter Family supporting Windows Millennium Edition (Windows Me). This driver
only supports Windows Me and Windows 98 SE. Due to the plug & play facility of PCI Express resp.
PCI/PCI-X, Windows Me is able to find, identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot Windows Me.
Windows Me detects the SysKonnect SK-9Exx/9Sxx Adapter as “PCI Ethernet Controller” dur-
ing the boot operation.
2. Select the check box S
PECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click N
EXT.
4. Select the check box S
EARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard disk).
6. Select the check box S
PECIFY A LOCATION.