Filter
Top Products
20 3 Installation of the Driver Software
7. Type the path to the driver, e.g. e:\SK-9Exx\Windows\WinME, where “e” is the designation
of the CD-ROM drive on your system.
8. Click N
EXT.
The window “Location of driver” is displayed.
9. Click N
EXT to continue the installation.
The menu “Windows has finished installing the new hardware device” is displayed.
10. Click F
INISH.
11. Restart your computer.
For more information, refer to the corresponding readme file.
Windows 2000
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit
Ethernet Server Adapter Family supporting Windows 2000.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot Windows 2000.
Windows 2000 detects the SysKonnect SK-9Exx/9Sxx Adapter as “Ethernet Controller” during
the boot operation.
The window “Found New Hardware Wizard” is displayed.
2. Click N
EXT.
In the same window the menu “Install Hardware Device Drivers” is displayed.
3. Select the check box S
EARCH FOR A SUITABLE DRIVER FOR MY DEVICE (RECOMMENDED).
4. Click N
EXT.
The menu “Locate Driver Files” is displayed.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard disk).
6. Type the path to the driver, e.g. e:\SK-9Exx\Windows\Win2000, where “e” is the designa-
tion of the CD-ROM drive on your system.
7. Click O
K.
8. Click N
EXT.
The menu “Driver Files Search Results” is displayed, listing the found driver and its location.
9. To install the driver, click N
EXT.
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital Signature
Not Found” is displayed.
10. To continue the installation, click
YES.
The window “Completing the Found New Hardware Wizard” is displayed.
11. Click F
INISH to complete the installation.
For more information, refer to the corresponding readme file.