Tally Genicom 9025N Printer User Manual


 
P
RINTING
F
ROM
DOS A
PPLICATIONS
C.2
About the Remote Control Panel
DOS users have access to many printer features through specific
DOS printer drivers; however, many software manufactures do
not develop printer drivers for their software programmes. Your
printer provides the software control panel for improved printer
control when DOS printer drivers are not available or when
certain print settings are not available through DOS software
programmes.
N
OTE
:
The printer’s Remote Control Panel is not a printer driver.
It should be used to set print settings that are not available
through DOS software programmes. Printer drivers are supplied by
the manufacturers of your DOS software programmes. If your DOS
software Programme does not include a printer driver for your
printer, contact the manufacturer of the software or use one of the
alternate printer drivers.
Installing the Remote Control Panel
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\cdsetup.exe in
the Open box (where x is the drive letter for the CD-ROM
drive) and click OK.
2
Select the appropriate language.
If you can’t find the desired language from the screen, use
the scroll button on the bottom right of the window to display
more languages.
3
Click Install the Software-III on your PC (WinRCP).
4
Click Next.
The files are copied into the appropriate directory.
5
After the installation is completed, click Finish.