Filter
Top Products
2.12
S
ETTING
U
P
Y
OUR
P
RINTER
For Network Printing
You can attach your TallyGenicom 9025N printer to a network
using an Ethernet cable (UTP cable with RJ.45 connector).
If you are a TallyGenicom 9025 user, you need to install the
optional network interface card. For a TallyGenicom 9025N
printer, you can replace the network interface card to one
supporting the wireless LAN interface. For details about
installing the card, see see page E.6.
Using an Ethernet Cable
1
Make sure that both the printer and the computer are
turned off.
2
Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3
Plug the other end of the cable into a network LAN
connection.
See your computer User’s Guide, if you need help.
Using a Network Antenna
1
Screw the wireless network antenna counterclockwise into
the port.
To the network LAN connection