Tally Genicom 9025N Printer User Manual


 
U
SING
THE
C
ONTROL
P
ANEL
3.16
PCL Menu
This menu sets the PCL emulation configuration. You can set the
font type, symbol type, lines per page, and point size.
(*: the default setting)
Item Explanation
Typeface
You can select the standard font to be used
in PCL emulation.
PCL1~PCL7’s interval between letters is
fixed, and PCL8~PCL45’s interval is
proportional to the font type and point
size. You can adjust the font size of
PCL1~PCL7 using the
Pitch
item, and
PCL8~PCL45 can do using
Point Size
item (see page 3.17).
PCL46~PCL54’s interval and point size are
fixed.
Symbol
This item selects the symbol to be used in
PCL emulation. The symbol is the group of
numbers, marks, and special signs being
used when printing letters.
Lines
This item allows you to set vertical spacing
from 5 to 128 lines for the default paper
size. The lines may differ according to the
paper size and printing orientation.
Pitch
When you select one between PCL1 and
PCL7 from the
Typeface
menu, you can
determine the font size by setting the
number of characters that will print in one
horizontal inch of type. The default value, 10
is the best size.
Values: PCL1* ~ PCL54
Values: ROMAN8 ~ PCCYRIL *PC8
Values: 5 ~ 128 *60 (Letter), 64 (A4)
Values: 0.44 ~ 99.99 (0.01 unit) *10