Filter
Top Products
Safety Information
67
Do not move the unit unless the power cord has been removed from the
socket. Otherwise you may damage the cord. The result could be a
short-circuit or a fire.
Do not place any heavy objects on the power cord. Do not pull or kink the
cord as this can result in damage to the cord. The result could be an elec-
tric shock or a fire.
Make sure that the machine is not standing on a cord to another machine
as this can result in damage to that cord. The result could be a fire or
improper functioning of the unit in question.
Make sure that the power supply to the unit has the correct voltage. Oth-
erwise the result could be a fire or an electric shock.
Switch off the unit immediately and unplug the power cord if the power
supply cord is damaged. Failure to do so could result in a fire or an elec-
tric shock. Inform your customer support technical specialist.
Use only extension cords that are designed for at least the maximum
power rating of the machine. Extension cords with lower ratings can result
in the unit overheating and can even lead to a fire.
Perform only the procedures that are described in this manual. Using the
machine improperly can result in a fire or an electric shock.
Do not place any heavy objects on the machine.
Do not open any covers on the machine while printing is in progress.
Do not switch off the unit while printing is in progress.
Do not place any magnetic objects near the machine.
Do not use any flammable sprays, liquids or gases in the vicinity of the
machine.
Do not remove any safety devices and do not alter the construction of the
machine. The unit is equipped with high-voltage components. Using the
machine improperly can result in a fire or an electric shock.
Do not insert any paper clips, staples or other small metal objects into
openings on the machine. The result could be anelectric shock or a fire. If
metal pieces are fed into the machine, switch it off immediately, discon-
nect the power cord and inform your customer support technical special-
ist.
Do not place coffee cups, drinks bottles or other containers with liquids in
them on the machine. If liquid enters the machine the result could be an
electric shock or a fire. If liquid does get into the machine, switch it off
immediately, disconnect the power cord and inform your customer support
technical specialist.
If the machine becomes unusually hot, or if you notice smoke or an
unusual odor coming from the machine, switch it off immediately and