Filter
Top Products
Introduction
5
Remote Control
The remote control is used to control all functions of the system. If the screen saver is activated
(black monitor), touching the remote control will automatically wake up the system. The remote
control uses 4 AAA batteries. The system will tell you when batteries are running low. Change the
batteries at the back of the remote control.
The reach of the remote control signal is 20 meters. For users sitting in an open plan office, this
can cause problems. Use the little, white switch placed under the batteries to change the reach of
the signal from 20 meters to 2 meters. This will prevent you from unintentionally controlling
another video system, when you control your own system.
Microphone
The high quality table microphone is designed to be placed on a table during a videoconference.
The ideal location for the microphone is on a flat surface at least 2m (6.5 ft) from the front of the
system. The microphone cable should always point towards the system. The system will
automatically equalize sound levels. Loud and soft voices are picked up and transmitted to the far
end at approximately the same level.