Filter
Top Products
D1337703_T2000_MXP_User_Manual
12
2.3 Monitor Configuration
Power on the monitor and use the monitor remote control to select the "PC analog" video input
and Hypersound OFF.
How to select "PC analog" video input:
1. Press "menu" on the monitor remote control. (Note! Not the TANDBERG remote control.)
2. Select "Input select".
3. Select "PC analog".
How to set Hypersound OFF:
1. Press "menu" on the monitor remote control.
2. Select "Sound".
3. Go down to "Hypersound" and set to "OFF". Use arrow keys left and right to change the
setting.