Filter
Top Products
6
Establishing a Communications Link
The optical mouse has 256 identification codes that allow the
mouse and its receiver to operate without interference from other
radio frequency devices.
To set the identification code and establish a radio link between
the mouse and the receiver:
1 Press and release the link button, located on the bottom of the
optical mouse.
2 Press and release the link button on the receiver.
The receiver’s status light flashes while it scans the
identification codes for the mouse. Once a code is selected, the
status light stops flashing.
3 Press and release the screen scroller (middle) button.
You are now ready to use the optical mouse.
NOTE: You must reestablish the communications link every
time you change the batteries.
Personalizing the Mouse Features
You can assign functions to the third, fourth and fifth mouse
buttons and control cursor movement by personalizing the mouse
features from the Mouse Properties screen. To do this:
1Click Start, Settings and Control Panel.
2 Double-click the Mouse icon.
The Mouse Properties screen appears.
This screen has six tabs with options for selecting and controlling
mouse features.