Filter
Top Products
18
Output
This allows restricting the number of channels being sent to the
computer to 16 for reduced host load, or setting the full channel
count of 32. Especially at high sampling rates, if you don’t
need the full 32 channel count from the mixer to the computer
for your project, you will get better performance from your
computer by setting this to 16.
(Note) Before changing this setting, be sure that no audio
applications are running, and no sound is being played back
through the IF-FW/DM
MKII. After changing the setting, wait a
few seconds for the driver and OS to reconfigure to the new
setting before re-launching your audio application.
Version Information
This tells you what version of the IF-FW/DM MKII software is
currently being used. Updates may be made available through
the TASCAM web site at www.tascam.com
IF-FW/DM MKII DAW Setup
Below are instructions for setting up common DAW software
applications to use the IF-FW/DM
MKII interface. If your app isn’t
covered here, but does support ASIO on PC or Core Audio on the
Mac, or if you need more detailed instructions to configure your
app, please refer to the documentation for your app to set up an
audio/MIDI interface.
Windows - WDM
WDM is the standard Windows driver interface, and provides
Audio and MIDI services to the OS and all applications that
support WDM.