Filter
Top Products
27
DM-4800
By default, the DM-4800 puts busses 1-24 on IF-FW/DM MKII
outputs 1-24 and duplicates busses 1 – 8 on outputs 25-32.
These routing settings can be changed in the OUTPUT SLOT tab
of the DM-4800’s ROUTING screen.
Routing control is identical
to the DM-3200 described
above.
Mixer Inputs
DM-3200
The IF-FW/DM MKII’s mixer inputs are configured from the
INPUT tab of the mixer’s ROUTING screen.
(Note) By default, there are no option card signals routed into
the mixer.
Routing Control
Use POD 3 to select a
page of inputs, use the
arrow keys to navigate
around the inputs. Use the
jog/dial to select an input
and press ENTER to
confirm it. Use POD 4 to
choose a sub-set of the
available inputs.
Use the Batch routing area at the bottom of the screen to route
blocks of 8 at a time for speed. Don’t forget to press ENTER.