Filter
Top Products
32
These last 5 settings differ also in the names that the
application sees for each channel, no additional processing is
implied. These match the Windows recommended
configurations for surround audio playback.
Assign WDM Channels Dialog
This is the dialog box used to set the WDM input or output
mappings.
To make a change, follow the steps below.
1. Select a “Speaker” in the Speaker pull-down menu; this
corresponds to the names that WDM is concerned with.
2. Select an IF-FW/DM
MKII channel in the “Channel” pull-
down menu.
3. Click on the Assign button.
4. Repeat for the other speakers available.
5. Click on Close.
The OS remembers these settings for you.