TDK iFA Series Network Card User Manual


 
Data Sheet: Maxeta
TM
iFA Series
©2002-2006 TDK Innoveta Inc.
iFA 28V 600W Advance Datasheet 8/3/2006
(
877
)
498-0099
1/19
MAXETA iFA SERIES DC-DC POWER MODULES
48V Input, 28V Output, 600W Full Brick
The Maxeta series power modules are ideally
suited for wireless applications to power
various RF power amplifiers. With a typical
90.5% full load efficiency, a power density
greater than 110W per cubic inch and a total
power and current output capability of 600W
and 21.4A respectively, the Maxeta Series
offers the highest efficiency, power density and
usable output power in a standard full brick
package currently available. A wide output
voltage trim range, -40% to +10%, remote
sensing, power good indication, isolated
remote on/off control and single wire active
current sharing are standard features
enhancing versatility. The Maxeta series
power modules are also suited for other
telecommunication applications.
Standard Features:
Industry Standard 600W full brick
Power density: > 110W/cubic inch
High efficiency: up to 92%
Typical efficiency: 90.5% at nominal input and
100% load
Up to 600W of output power in high ambient
temperature with air flow
Meets basic insulation requirements
Single wire forced current sharing
Start-up into pre-biased output bus
User selectable on/off (either positive or
negative logic)
Wide output voltage adjustment range
Auto-recovery protections:
o Input under and over voltage
o Current limit
o Short circuit
o Thermal limit
Latched output over-voltage protection
Power good Indication
Auxiliary logic output
High reliability open frame, surface mount
construction
Base-plate for improved thermal management
Constant switching frequency
Optional 0.110” pin length
UL 60950 (US and Canada), VDE 0805, CB
scheme (IEC950)
CE Mark (EN60950)
EMI: CISPR 22 Class A/B with external filters
Multiple patents pending
ISO Certified manufacturing facilities
Optional Features
:
Short Thru-hole pin 2.794mm (0.110”)
Output over-voltage signal replaces power
good