Filter
Top Products
Troubleshooting (continued)
Issue Solution
USER GUIDE
17
Even though myTalker is turned on,
the call is not automatically connected
to myTalker when you dial a number
on your mobile phone.
You hear a crackling noise when
connected on a call through myTalker.
You hear a clicking noise when
connected on a call through myTalker.
1.Ensure that your Bluetooth mobile phone is set to
Bluetooth mode, and that myTalker (BTHS Music)
has been selected as the connected Bluetooth
device. (This is important as most Bluetooth
phones are designed to pair with more than one
Bluetooth device.)
2.The problem may persist in some rare cases, as
the phone may be too busy to process the call and
have difficulty establishing the connection with
myTalker. If this is the case, make a call from your
mobile phone, and then press the TALK button on
myTalker. The mobile phone should transfer the
call to myTalker within one second.
You have exceeded the 30 foot-range of the Bluetooth
connection. Move your mobile phone closer to
myTalker.
You are experiencing interference on the connection
between your mobile phone and myTalker. Try
changing locations.
et7000_ug_fnl_R 1/24/06 2:48 PM Page 17