Filter
Top Products
To Pair the Devices
1. Turn on the mobile phone and place it next to myTalker.
2. Initiate the Bluetooth device pairing (discovery) feature on the mobile phone.
Refer to the mobile phone user guide for instructions on initiating this feature.
3. With myTalker turned off, press and hold the POWER button until the blue and
amber LEDs flash alternately or until you hear Pairing tone (approximately five
seconds).
4. Release the POWER button.
myTalker is now in Pairing Mode.
5. When the mobile phone discovers myTalker, it will identify myTalker as
BTHS
Music
. Follow the mobile phone prompts and enter 0000 (myTalker passkey)
when prompted for the passkey (also called passcode or BT PIN).
When pairing
is complete, myTalker will be placed in standby mode, ready to make and receive
calls, the amber LED will turn off, and the blue LED will flash at two-second
intervals.
To Cancel Pairing Mode
While you are in pairing mode, you can cancel the pairing process and turn off
myTalker.
1. While in pairing mode, press and hold the POWER button until both LEDs turn
off or you hear the Off tone (approximately three seconds).
6
et7000_ug_fnl_R 1/24/06 2:48 PM Page 6