Filter
Top Products
2
Getting Set Up
2-8
Phaser 220i and Phaser 220e Color Printers
Adding paper or transparencies
Unpack the paper tray. Be sure to remove all adhesive tape.
Note
The printer uses a different paper tray for each paper size (Letter,
Letter-perforated, A4, A4-perforated). The trays are not
adjustable.
1.
If you are using a tray for perforated paper or transparencies, set
the selection switch on the tray (
1) for paper or transparencies.
Trays for non-perforated plain paper do not have this switch.
2.
Make sure that the metal plate is all the way down. If necessary,
push the metal plate down until it clicks into place. Do not
attempt to change the position of the vertical tab (3) at the back of
the paper tray.
TRANSPARENCY
PAPER
1
8869-20
8869-12
23