Filter
Top Products
Getting Set Up
2
User Manual
2-27
Workstation users
The files on the Phaser 220 utilities diskettes are in PC format and can be
used by Unix workstations to control Tektronix printer features. They are
also available through electronic mail (see the manual Phaser 220 Drivers and
Utilities Printing Reference for details).
You can copy these files to your workstation as you would other PC-format
files (log on as root, mount the drive, and use the cp command). For detailed
information on using these utility files, refer to the Phaser 220 Drivers and
Utilities Printing Reference.
Turning off the sample prints
To disable the sample prints, use the DIP switches on the printer’s rear
panel. Set Switches 2, 3, and 4 down.
When the sample prints are disabled, a startup page will print at power-up if
the startup page is enabled.
Turning off the startup page
You can disable the startup page by sending a PostScript language file from
the printer’s utilities diskette to the printer. For details on how to disable
the startup page, refer to the manual Phaser 220 Drivers and Utilities Printing
Reference.
Even when the startup page is enabled, you can still keep it from printing by
removing the paper tray(s) at power-up. Put the paper tray(s) back in after
the READY light stops blinking.