Filter
Top Products
4
Caring for Your Printer
4-8
Phaser 220i and Phaser 220e Color Printers
8.
Slide the paper tray (containing the cleaning tray) into the slot. If
your printer has a lower tray assembly, slide the tray into the
lower slot.
9.
Press the TEST button on the back of the printer for 3 seconds.
The printer attempts to load paper, bringing the paper-pick rollers
in contact with the alcohol-dampened pad in the cleaning tray.
10.
The JAM indicator blinks, indicating that the rollers have been
cleaned.
a.
If your printer has a single paper tray, the procedure is
complete. Slide out the paper tray, remove the cleaning tray,
and replace the paper or transparencies. Slide the paper tray
back into the slot. If paper-picking problems occur, repeat this
cleaning procedure.
b.
If your printer has a lower tray assembly, pull out the paper
tray a few inches and then push it back in to clear the JAM
indicator. Then perform the steps on the next page to
complete the procedure.
ERROR JAM MEDIA
8869-33
8
9
10
...
..
...
.
SECOND
FEEDER
TEST
SWITCH