Filter
Top Products
24
Symptom: In all four colors? Solution: 1) Choice of media or
2) Replace Imaging Unit, or Fuser, or Fuser Roll or Main Charge Grid.
Prints are black (edge to edge).
1 Remove, then re-insert the Main
Charge Grid.
2 Replace the Main Charge Grid.
Hints
■ Use Tektronix media.
■ Use the correct media tray for
the media you are using.
■ When using the Multi-Purpose
Tray, select the correct media in
the front panel.
■ Relative humidity may be too low
(below 30% relative humidity).
All 4 colors are extremely faded.
or
Each page has a chipped
corner.
33100-34