Filter
Top Products
PS280 & PS283 User Manual
29
Appendix B: Maintenance
This appendix provides information for the basic maintenance of the
PS280 or PS283 Laboratory DC Power Supply.
Cleaning
To clean the Laboratory DC Power Supply, use a soft cloth
dampened in a solution of mild detergent and water. Do not spray
cleaner directly onto the instrument, since it may leak into the
cabinet and cause damage.
Do not use chemicals containing benzine, benzene, toluene, xylene,
acetone, or similar solvents.
Do not use abrasive cleaners on any portion of the power supply.
Preparing for Shipment
If the original packaging is unfit for use or not available, use the
following packaging guidelines:
1. Use a corrugated cardboard shipping carton having inside
dimensions at least three inches greater than the instrument
dimensions.
2. Put the instrument into a plastic bag or wrap to protect it from
dampness and loose packing material.
3. Place the instrument into the box and firmly stabilize it with
packing material.
4. Seal the carton with shipping tape.