Filter
Top Products
Via Text Management
To change the administrator password via Text Management
Interface:
• From the Telnet Main Menu, select “Management setup”
• Select “Change password”
• Enter the admin password and press [ENTER]
If you are not logged in through the console, you must verify your
password. For security reasons, the system does not display the
typed letters when typing in passwords.
Figure 4-2: Password Change
4.1.3 Enable/disable Telnet
The system allows the administrator to disable Telnet to prevent
users from accessing the system through Telnet.
Note:
The RamSan does not allow you to disable access to the console.
This provides a method to re-enable the Telnet, Web, and SNMP.
RamSan-300/320/325 User’s Manual - 22 -