Filter
Top Products
Now, the front panel display
indicates that the system is
powering off. Depending on
the system mode and the
size of memory, this
procedure may take a while.
The front panel cycles
between a power off status
bar and an estimated time
until the system completes
the power off.
*** Powering Off ***
Via Web Management
To perform a manual shutdown via the web interface:
• Click on the “Management Control Processor” graphic
• Click on the “General Info” tab
Press the “Shutdown” button.
Via Text Management
To perform a manual shutdown via Text Management Interface:
• From the Telnet Main Menu, select “Power down system”
• Confirm the power down.
Once the user confirms the power down, the system powers off
after completing all writes.
To resume operation, press the “Power” button to the left of the
power supplies. For additional details, see Section 2.7 – Turning
on the System.
4.4.2 Automatic shutdown
In the event that the system senses a high system temperature,
power out of specs, or AC power is lost, the system will
automatically initiate the shutdown procedure.
RamSan-300/320/325 User’s Manual - 34 -