Filter
Top Products
6.2 Adding LUNs
The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1 Via Web Interface
To add LUN(s) via the web interface:
• Click on the “Management Control Processor” graphic
• Click on the “LUN Config” tab
• Click the “New LUN” button
• Select a “LUN number” from the drop-down box
• Enter the “Device ID”
• Adjust the “LUN size” using the scroll bar
• Assign links to FC ports (see Section 6.4 – Linking LUNs to/from
Fibre Channel Controllers)
• Assign LUN masks (see Section 6.7 – Managing Access Lists)
• Set backup mode (see Section 6.9 – Setting Backup Mode)
• Click the “OK” button
• The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface
RamSan-300/320/325 User’s Manual - 68 -