Filter
Top Products
Fibre Channel Performance
The front panel display can show the Fibre Channel Controller
performance:
From the front panel main
menu, select
“Active Monitor Mode.”
This mode shows the
performance bars for each
Fibre Channel port. The
numbers represent the
Fibre Channel Controllers.
If a controller is not
installed, the number and
corresponding performance
will not display. The top
bars represent the port A
and the bottom bars
represent port B.
The system stays in Active
Monitor Mode for 10
minutes or until the user
selects “Deactivate
Monitor” from the front
panel main menu.
A
ctive Monitor Mode
1==- 2=-- 3- 4===
RamSan-300/320/325 User’s Manual - 41 -