• Displays a list of the
current IP
configuration,
hostname, IP
address, subnet
mask, gateway
address (if
applicable), and
hardware Ethernet
address.
• To continue setting
up the Ethernet
configuration
• Shuts down and
restarts the
Ethernet port using
the current IP
assignment
configuration
• Exits the setup
menu.
Show Current Config
Set IP Config
Restart Network
Exit Menu
Use the arrow buttons to scroll up and down through the list.
Pressing the “
Menu” button returns to the previous menu, and
pressing the “
Select” button exits the menu system. To continue
setting up the Ethernet configuration, select “Set IP Config.”
After selecting “Set IP Config,” you may use the arrow buttons to
cycle through:
• Enables you to set a
static IP address for
the RamSan.
• Sets the IP
configuration to
DHCP
• Disables Ethernet
• Returns to the Main
Menu without
making any
changes
Static
DHCP
None
No change
RamSan-300/320/325 User’s Manual - 28 -