Filter
Top Products
12
EN
General operation
Switching the set on and off
To switch the TV set on, put the main power switch located at the rear
on the ON position, then press the power button located on the front
panel. When the set is on, the indicator on the front is green.
Standby mode: press the power button on the front panel.
When the TV set is in standby mode, the indicator on the front is
orange.
Volume
Volume control: use the buttons on the front panel or the remote control
to increase and decrease the volume.
Sound mute: press the
button on the remote control to temporarily
mute the sound.
To restore it, press the button again or use the volume+ button.
Displaying status information
In TV mode, press the yellow info button on the remote control to
display the number and name of the channel you are watching, the
zoom format, the type of sound, and the remaining time if the sleep
timer is on.
The number and name of the channel are displayed whenever you turn
on the TV set or change channels.
Accessing TV channels
Using the numeric buttons: for channels 1 to 9, press the corresponding
button. For two-digit channels, first press the 0/-- button, then the
channel number (e.g. type 012 for channel 12).
Using the pr+/pr- buttons: scan through the programmes. AV
programmes are not accessible.
Accessing AV programmes
Press the av button to display the last selected AV programme and
scan through the other AV programmes.
42WM03STW-0707-en.p65 2003/9/5, PM 12:5312