Filter
Top Products
7
EN
Using the remote control for other equipment
The remote control supplied with your set can be used for other equipment, such as videorecorders, DVD players,
satellite receivers or hi-fi systems. This page provides information concerning the remote control’s use with these
other types of equipment.
Video recorder
DVD player Satellite receiver Hi-fi system
Set the switch to vcr Set the switch to
dvd/ld
Set the switch to
hifi/sat
Set the switch to
hifi/sat
On/Standby On/Standby On/Standby On/Standby
To display the main
menu
To display the main
menu
To display the main
menu
Vertical scrolling in
menus
Vertical scrolling in
menus
Vertical scrolling in
menus
Horizontal scrolling
in menus
Horizontal scrolling
in menus
Horizontal scrolling
in menus
To confirm an action To confirm an action To confirm an action
To close a menu To close a menu To close a menu
To directly access
channels or enter
numeric values
To enter numeric
values or select
options in menus
To directly access
channels or enter
numeric values
To select a radio
station using its
number
To change channels
To change channels To change stations
To select AV input
RewindREW Rewind
PLAY Play Play
F.FWD Fast forward Fast forward
STOP Stop Stop
PAUSE Pause Pause
REC Record
To switch the sound
off and back on
again
To set the volume
level
Programming the remote control
1 Set the selection switch to the unit you wish to use the remote control with.
2 Hold the menu button down and enter one of the 3-digit codes corresponding to the make of you unit (the code
list can be found at the end of this document).
3 Release the menu button.
4 Set your unit (VCR, DVD, HiFi, etc) in standby mode by pressing the standby button on the remote control. If this
does not work, try another code.
Depending on the age or type of some products, certain functions may not be available.
Some codes may cover more functions than others. Test the functions that you can control and if necessary, try
other codes.
Note the code or codes that are the most suitable here.
When you change the batteries in the remote control, remember to reprogram it.
42WM03STW-0707-en.p65 2003/9/5, PM 12:527