Filter
Top Products
32
EN
Wall mount installation (optional)
Installation steps
Step 1.
Attach the horizontal supports (C and D) to the left
and right modules ( A and B) using the appropriate
screws (E).
Step 2.
Install the wall mount bracket onto the wall.
Note:
This package includes two different sets of
screws - one for mounting on a cement wall
and one for a wooden wall. Please consult with
a qualified installer to make sure that this wall
mount and plasma monitor can be installed.
You can change the mounting direction and
inclination angle (0, 5, 10, 15 degrees) by adjusting
the screw position on the wall mount.
42WM03STW-0707-en.p65 2003/9/5, PM 12:5332