Filter
Top Products
Basic Operation
Switching the projector on/off
20 - ENGLISH
1. Switch the MAIN POWER button on.
The power indicator lights up in red.
2. Remove the lens cover from the lens.
3. Press the POWER button.
The power indicator lights up in green after flashing
for a while.
The STARTUP LOGO is displayed on the screen.
See “STARTUP LOGO” on page 40.
1. Press the POWER button.
The confirmation screen is displayed. It will
disappear and return to the projection after
10 seconds without any operation.
To return to the projection, press any button except
the POWER button.
2. Press I to select OK and press the POWER or
ENTER button.
The power indicator lights up in orange while cooling
the lamp, then illuminates red when it is ready to
switch off the MAIN POWER button.
3. Switch off the MAIN POWER button on the back of
the projector.
Switching on the projector
(1)
(1)
(3)
(3)
(2)
(2)
POWER indicator
NOTE:
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and do not affect the performance of the projector.
• Do not attempt to modify the lens cover which may cause burns, fire or damage to the projector.
Switching off the projector
(3)
(3)
(1)
(1)
(2)
(2)
POWER indicator
NOTE:
• Press the POWER twice or for a long duration to switch the power off.