Filter
Top Products
PICTURE menu
ENGLISH - 35
Settings
You can edit the named memory settings.
Q Deleting a memory setting
1. Select MEMORY DEL and press the ENTER
button.
2. Select the required memory setting and press the
ENTER button.
If you select ALL DELETE, you can delete all of the
saved memory settings.
3. Select OK in the confirmation screen and press the
ENTER button.
Q Changing the name of the memory
setting
1. Select the required memory setting and press the
ENTER button.
2. Use F G I H to specify the location of the
required character to enter and press the ENTER
button.
You can enter up to 16 characters.
3. Repeat step 4 until you finish the text line.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press G then perform step 4.
4. Select OK and press the ENTER button to set the
entered text as a name.
The current selected signal will be displayed. This is
available with signals from COMPUTER IN/
COMPONENT IN/HDMI IN only.
MEMORY EDIT
NOTE:
• If you have not saved any settings, MEMORY1 - 16 will
not be displayed.
OK CANCEL
ALL DELETE
MEMORY NAME INPUT
SIGNAL MODE
NOTE:
• See “List of compatible signals” on page 47.