Filter
Top Products
19
E-DOC-CTC-20051017-0152 v1.0
Chapter 2
Local Network Setup
To verify USB
connectivity in Windows
The SpeedTouch™ USB connection is represented as a local network interface. You
can easily check this interface by opening the Network Connections window from
Windows’ Control Panel.
To install Mac USB
drivers
You can find the required USB driver software on the Setup CD. The installation is
Plug and Play, meaning that installation requires almost no effort.
Proceed as follows:
1 Insert the blue USB cable into the SpeedTouch™ USB port marked with the
USB logo.
2 Plug the other end of the USB cable into (one of) the USB port(s) of your
computer. In most cases your computer's USB port is marked with the same
USB symbol.
Mac OS X will automatically recognise the detection of a new port.
3 Make sure the SpeedTouch™ Setup CD is inserted, and then click OK.
4 In the Network window, click Apply Now.
Device settings Once you have connected a device, you can personalise its settings. For more
information, see “ Device settings” on page 15.
A USB logo looks like this:
You can also connect your computer to the SpeedTouch™ via a USB
hub, provided that the hub is autonomously powered.