Filter
Top Products
34
Finishing Installation of the ooma Hub
The last step in installing the ooma Hub device is to connect a phone and power.
1
Use a phone cable to plug your phone into the port labeled PHONE on the ooma Hub (a short phone
cable is provided).
2
Plug one end of the AC adaptor into the port labeled POWER on the ooma Hub and the other end into a
power outlet. The clear ooma Tab, at the top left corner of the ooma Hub device, should light up red as
it boots up.
3
Power on your network devices (modem, switch, router). Wait a few minutes for everything to boot up.
4
Turn on your computer and connect to the Internet. Open up a web browser to make sure you are
online. This will allow the ooma Hub to complete its conguration.
Within a few minutes, the clear ooma Tab should turn blue. Pick up the phone connected to the ooma Hub.
You will hear the signature ooma dialtone that conrms it is working.
installing the ooma hub
PHONE POWER