Filter
Top Products
3 PRINTING FROM MACINTOSH
96 Printing from an Application on Mac OS X 10.2.4 to Mac OS X 10.5.x
3) Do not Print Blank Pages
Select whether to ignore blank pages for printing.
y When more than 2 is selected at the [Page per Sheet] option in the Layout menu, the blank pages will be
printed.
y Pages with header or footer will be printed even if the content is blank.
4) Distinguish Thin Lines
Select whether to print thin lines clearly.
Printer Features
In the Printer Features menu, you can set special printing features.
Finishing
In the Finishing menu, you can set the destination, hole punching and stapling.
1) Destination
This option selects the destination tray.
- Printer’s Default
— Select this option to route the output to the default tray (that is set as the default tray for raw
job in the Printer setting page of TopAccess Administrator’s page).
- Exit Tray — Select this option to route the output to the exit tray.
- Tray 1 — Select this option to route the output to the upper tray of the Finisher (optional).
- Tray 2 — Select this option to route the output to the lower tray of the Finisher (optional).
- Job Separator Upper — Select this option to route the output to the upper tray of the Job Separator (optional).
- Job Separator Lower — Select this option to route the output to the lower tray of the Job Separator (optional).
y Depending on the type of the optional Finisher and destination settings, stapling and hole punching may not be
performed.
y Depending on the equipment settings, the paper may be delivered to a tray that cannot carry out stapling or
hole punching when [Printer’s Default] is selected as the [Destination] option.
y For e-STUDIO355/455, [Tray 1] and [Tray 2] can be selected when the Finisher (optional) or Saddle Stitch
Finisher MJ-1024 (optional) is installed. When the Hanging Finisher (optional) is installed, only [Tray 1] can be
selected.
y For e-STUDIO205L/255/305, only [Tray 1] can be selected when the Hanging Finisher (optional) or Saddle
Stitch Finisher MJ-1025 (optional) is installed.
y When the Job Separator (optional) is installed, you can select [Job Separator Upper] and [Job Separator Lower]
instead of [Exit Tray].
1
2
3