Filter
Top Products
ingilizce-1.FH11 6/7/05 12:13 PM Page 13
To give names in the AV or PC mode,
use the MENU and (
–
) buttons on the
remote control, to bring the SETTINGS
menu on screen Using the down (
)
button on your remote control, yellow
highlight the Manual Setting selection
and press “OK” or the right/left (
/
– +
)
buttons.
The Manual Tuning menu will appear
on the screen. Using the right (
+
) button
select the Station line. Using the Up (
)
and down (
) buttons to select the desired letter
and the direction (
/
– +
) buttons for the desired
column.Press the “OK” button after you are done.
Changes are stored in memory.
If you want to skip some of the channels
in the memory while selecting program
with (
) and ( ) buttons, select the
Program Skip bar using the right button
on the Manual Tuning menu. Using the
Up (
) and down ( ) buttons, the program for
which you select “
” mark will be skipped.
Fine Tuning
Program Skipping
If you wish to assign an 8- character
labelling to the channels in the memory,
select station bar using the right button
(
+
) on the Manual Tuning bar. You can
choose a letter using the Up (
) and
Down (
) buttons and a section with the direction
(
/
– +
) buttons. After the process press the “OK”
button. The changes you made are now stored.
You can assign labelling to the next programme
in the same way.
Naming Stations
Manual Setting (For AV/PC Modes)
Please note: In Manual Setting selection you
can only make adjustments in AV or PC mode
you are in. To make changes in the AV or PC
mode, enter the Manual Settings menu, which
becomes active after you enter these modes.
If the current channel requires fine tuning,
skip the Manual Fine Tuning bar using
the right (
+
) button on the Manual Tuning
menu. Using the up (
) and down
(
) movement (
/
– +
) buttons on your
remote control, adjust the program on the screen
to the quality you wish. Under normal conditions
you will not need Fine Tuning. Your television will
automatically lock channels, which need AFC
values. However, in the event that the TV
transmitters do not work, then you may need to
use this process. For storing the settings to the
memory press OK button.
ENGLISH -14-