Filter
Top Products
SETTING NETWORK FUNCTIONS 147
3
Specify following items as required and press the [ENTER] button.
y SMB PROTOCOL — Select whether the SMB protocol is enabled or disabled.
When you want to enable the SMB protocol to enable the Save as file to network
folder using SMB and sharing the “FILE_SHARE” folder of this equipment, but not to
enable the SMB printing, press the [DISABLE PRINT SHARE] button.
When you want to enable the SMB protocol to enable the SMB printing, but not to
enable the Save as file to network folder using SMB and sharing the “FILE_SHARE”
folder of this equipment, press the [DISABLE FILE SHARE] button.
y [NetBIOS NAME] — Press this button to enter the Windows computer name of this
device if this device is connected to the Windows network. This must be specified
when you want to enable SMB printing.
y LOGON — This displays the Windows network logon environment. “workgroup” will
be displayed if this equipment logon the workgroup network and “domain” will be dis-
played if this equipment logon the domain network. This can be specified only from
TopAccess. For instructions on how to set the workgroup or domain, please see “Set-
ting up the SMB Session” in “Chapter 7 TopAccess Administrator Mode” of TopAc-
cess Guide.
y [WINS PRIMARY] — Press this button and enter the IP address of the primary WINS
server using the digital keys if required.
y [WINS SECONDARY] — Press this button and enter the IP address of the secondary
WINS server using the digital keys if required.
When you press the [NetBIOS NAME] button, the input screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the entry.
y When you select [DISABLE] or [DISABLE FILE SHARE], the Save as File to MFP
Local function will be disabled.
y If this equipment is configured to logon the domain in the SMB Session of TopAccess
administrator mode but “workgroup” is displayed, login on the domain network is
failed. In that case, confirm that the Windows Server and the SMB Session settings
are correctly set.
y When you set “Domain” for the Logon setting in the SMB Session of TopAccess
administrator mode, this equipment will logon to the domain network after turning ON
the power of equipment or changing the network settings and pressing the [APPLY
NOW] button.
y You can enter only alphanumeric characters and “-” (hyphenation) for NetBIOS name.
If you use any other characters, a warning message will be displayed.
y Do not enter an IP address that starts with “0” (i.e. “0.10.10.10”), “127” (i.e.
“127.10.10.10”), and “224” (i.e. “224.10.10.10”). If you enter such an address, the
equipment cannot communicate with the WINS server.