Filter
Top Products
2 PRINTING FROM WINDOWS
34 Setting Up Print Options
Paper Handling Tab
The Paper Handling tab allows you to enable Front Cover printing, Back Cover printing, Inserting Pages, and Interleaving
Pages.
y "Use Front Cover", "Use Back Cover", "Insert Pages" and "Interleave Pages" are not available when the Tab
printing function is set.
y When the size of covers or sheets to be inserted is the same as that of the copy paper, change the media type or
specify "Paper Source" on the Basic tab menu; otherwise all data will be printed from the insertion drawer.
y If you select [Store to e-Filing] in the [Print job] box, [Use Front Cover], [Use Back Cover], [Insert Pages] and
[Interleave Pages] are unselectable.
1) Destination
This selects the destination tray to which jobs will be output.
- Inner Tray — Select this to route the output to the inner tray.
- Tray 1 — Select this to route the output to the upper tray of the Finisher (optional).
- Tray2
— Select this to route the output to the lower tray of the Finisher (optional).
y [Tray 1] can be selected when the Hanging Finisher (optional), Finisher (optional) or Saddle Stitch Finisher
(optional) are installed and configured on the Configuration tab.
y [Tray 2] can be selected when the Finisher (optional) or Saddle Stitch Finisher (optional) are installed and
configured on the Configuration tab.
2) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a different Drawer or
Bypass tray than the Paper Source option selected on the Basic tab.
To enable cover printing, check on the box and select the location from where a cover sheet is to be fed and the print
style to be used.
For the detailed instructions on how to print with the [Use Front Cover ] setting, see the following page:
P.74 “Inserting Different Types of Paper”
Source
Select the location from where a cover sheet is to be fed. When [Auto] is selected, the paper is automatically selected
according to the printed document size.
The selectable values in the [Source] box vary depending on the optional devices installed on this equipment and
their configuration on the Configuration tab.
1
3
2
5
4