Filter
Top Products
2 PRINTING FROM WINDOWS
Printing from Application 15
Printing from Application
This section describes how to print a document from an application.
P.15 “Considerations and Limitations”
P.16 “How to Print”
Considerations and Limitations
y When the User Management Setting is enabled on the equipment, the user name that is entered to log in to your
computer is used for the authentication of the print job. Therefore, your user name must be registered in the
equipment. If the user name is not registered, your print job is processed as the invalid job according to the
Department Code Enforcement settings.
When the Windows Domain Authentication is used for the User Management Setting, your computer must log in the
domain.
y If the No Limit Black function is enabled, you do not have to specify the department code when you print a document
with selecting [Black and White] in the [Color] option in the Basic tab of printer driver.
y Some options listed in the printer driver can also be set from an application (for example, collation). However, using
collation in the application may cause problems. In that case, use the driver option to perform the function, rather than
setting it from the application. Depending on the application, settings such as the orientation may need to be set in the
application, or the printer driver, or both. The application may not set up the file properly for printing on this equipment
and may also take longer to process. In order to print properly from the application that you are using, please see the
section about printing in the application’s manual.
About "Use PostScript Passthrough"
y When printing with the PS3 printer driver from Adobe Acrobat, the Fit to Paper enlargement feature does not work if
the [Use PostScript Passthrough] option is enabled in the PostScript settings of the PS3 printer driver. To use the Fit to
Paper enlargement feature, please disable the [Use PostScript Passthrough] option in the PostScript settings of the
PS3 printer driver.
y When printing with the PS3 printer driver from the application that creates the PostScript code for printing such as
Adobe Acrobat, the following print options may not work correctly. In that case, please disable the [Use PostScript
Passthrough] option in the PostScript settings of the PS3 printer driver.
- Manual Scale
- Print Paper Size
- Paper Type
- Use Front Cover
- Use Back Cover
- Interleave Pages
- Insert Pages
-Booklet
- Multiple Pages per Sheet
- All options in the Effect tab
- All options in the Image Quality tab