Filter
Top Products
2.PRINTING FROM WINDOWS
Setting Up Print Options 57
2 PRINTING FROM WINDOWS
5) Enable SNMP Communication
Check this to enable obtaining the configuration information from this equipment.
If you disable SNMP Communication, TopAccessDocMon notification also will be disabled.
Update Automatically/Manual
Select the method to update the option configuration information of the printer driver. This is available only when
[Enable SNMP Communication] is checked.
- Update Automatically
— Select this to update the option configuration information automatically every time the
[Configuration] tab menu of the printer driver is opened.
- Manual — Select this to update the option configuration information manually.
If the connection to the equipment has not been configured correctly, the message “The address of your printer
could not be located. Would you like to find it?” will be displayed when the Configuration tab is displayed. If it is
displayed, click [Yes] and search for the equipment using the Local Discovery dialog box. After searching for the
equipment, SNMP communication will be enabled.
[Update Now]
Click this to obtain the configuration information from this equipment immediately. This is available only when [Enable
SNMP Communication] is checked.
If the connection to the equipment has not been configured correctly, the message “The address of your printer
could not be located. Would you like to find it?” will be displayed when you click [Update Now]. If it is displayed,
click [Yes] and search for the equipment using the Local Discovery dialog box. After searching for the equipment,
SNMP communication will be enabled.
6) [Drawer Settings]
Click this to set the paper size and paper type of each drawer. The Drawer Settings dialog box appears by clicking
this.
P.58 “Drawer Settings”
7) [Version Information]
Click this to display the Version Information dialog box.
8) [Restore Defaults]
Click this to restore the configuration of this equipment displayed in the [Configuration] tab menu to the original factory
defaults.