Filter
Top Products
2.PRINTING FROM WINDOWS
Setting Up Print Options 27
2 PRINTING FROM WINDOWS
4) Units
Select the unit for the Tab Extension and Image Shift option. The default unit varies depending on the regional setting
of the client computer.
y The tab paper cannot be fed from LCF (optional) and drawers
y When you place the tab paper on the Bypass Tray, make sure the tab side of the paper is on the outside. The job
will be output to the inner tray.
y If the document for tab printing is not created properly or the Image Shift Width is not set properly, the image will not
be printed in the correct position within the tab extension. Please make sure to create the document and set the
Image Shift Width correctly.
y If mis-printing occurs while multiple tab pages are printed continuously, dirt may adhere to the reverse side of
paper. To avoid this, it is recommended to print tab paper as a separated job for each page so that this equipment
performs cleaning before printing the next tab paper.
For the detailed instructions on how to print on tab paper, see the following page:
P.80 “Printing on Tab Paper”
Place the tab pape
r
so that the tab side
is on the outside.