Filter
Top Products
Operating Basics
Satellite A30 Series 4-8
Satellite A30 Series
Version
1
Last Saved on 12/08/2003 14:15
ENGLISH using Euro_M.dot –– Printed on 12/08/2003 as IM_A30EN
CD/Digital Mode button
This section describes how to use the CD/DVD/Audio Control Buttons to
control the optical media drive and Digital Audio Data.
Whether your computer is turned on or off, the CD/DVD/Audio control
buttons are locked by default. To unlock them, press the CD/Digital mode
button for more than 3 seconds. Press the CD/Digital mode button again
for over 3 seconds to lock them again. When the CD/Digital mode is
unlocked, press the CD/Digital mode briefly to switch between CD and
Digital mode. The system status indicator LEDs will show you which mode
you are in.
CD/DVD Mode and Play button Digital Mode and press Play
button
OS is running Windows Media Player starts and
CD audio play begins.
Windows Media Player starts and
Digital Audio Data play begins.
The CD icon is displayed in the
Windows Task Bar.
The Digital Audio icon is
displayed on Windows desktop
screen.
To play Digital Audio Data, you must set the play list in the Windows
Media Player. The next time you play Digital Audio Data in succession, the
former play list will become active. If a CD was played the previous time,
then All Audio will be used.
Do not install or remove a memory module while the DVDROM drive
power is on. First turn off the power to the DVD-ROM drive.
CD/DVD/Audio control buttons
Besides the power button, the following four buttons control functions of
the optical media drive and Digital Audio Data:
1. Play/Pause Starts or pauses play.
2. Stop Stops play.
3. Next Advances to the next track, chapter or data
4. Previous Returns to the previous track, chapter or data
If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.