Filter
Top Products
44 AS/400 Print Solution — Operation
Operation
Operational procedure
Follow the procedure below to operate the WorkStation Customization Object for
TOSHIBA e-STUDIO.
1. Specify print file script (ORIENTATION, STAPLE, DUPLEX and
DRAWER) for a document to be printed with the MFP.
For the details of file script parameters, see the following page:
P.45 "Print file script"
2. Change a job to alter the OUTQ specified at the installation or
the setup to the one for printing functions.
3. Start up the auto assign (resident) program.
For starting up, see the following page:
P.38 "Step 3: Starting up auto assign (resident) program"
NOTE:
• Start up the resident program every time you execute IPL.
4. Perform routine work.
When you are performing routine work, you do not need to particularly pay atten-
tion to this function.
5. Finish a job.
Finish a job in any of the following methods:
• Execute a command [WRKACTJOB]. Then select a job to be finished and select
Option "4". Then press the execution key.
• Execute a command [ENDSBS] and then exit the corresponding sub system.
NOTE:
• Turn the power of the printer to be used OFF before starting the operation; other-
wise the program will exit in the middle of the operation.