Filter
Top Products
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1. Choose your preferred system language and tap Start to start the
initial setup process.
2. Connect to a Wi-Fi network.
You can tap Skip and turn Wi-Fi on later in Settings app.
3. Set date and time or enable automatic date & time and tap Next to
continue.
4. Register or sign in with a Google™ account. You can also skip this
step by tapping Not now.
5. Choose whether to use Google Location Service™ and tap Next to
continue.
6. Enter your name to personalize some apps. Tap Next to continue.
7. Tap Next to agree the privacy policy and other terms.
8. Your tablet is now set up and ready to use. Tap Finish to exit Setup
Screen.
Turning off the power
If you are not going to use your tablet for a long time, shut it down. You can
also turn the LCD off in order to extend battery life.
Shut down the tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the operating system's main screen the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off /disconnect the power , or remove external storage
media during data read/write. Doing so can cause data loss.
2. Turn off or remove any peripheral devices connected to the tablet.
3. Press & hold Power button for 2 seconds and select OK to turn off the
tablet.
In any emergency case, you can also press & hold Power button for
about 6 seconds to force power off.
Do not turn the tablet back on immediately - wait a short period to
avoid any potential damage.
TOSHIBA AT300
User's Manual 3-10