Filter
Top Products
2. MAJOR UNIT REPLACEMENT EO18-33023
2.4 Replacing the Peel-off Sensor
2-11
6) Replace the Peel-off Sensor with a new one, then reassemble in the reverse order of removal.
NOTES:
1.Be careful of the orientation of the Peel-off Springs as shown in the picture below when reassemblin
g
the Peel-off Sensor Unit.
2. After replacing the Peel-off Sensor, refer to the Setting Operation Manual or System Mode Manua
l
and perform the following operations.
zPerform the sensor adjustment.
Peel-off Spring L
Peel-off Spring R
Peel-off Sensor Unit