Filter
Top Products
2. PRINTER SETUP
ENGLISH VERSION EO1-33047
2.8 Installing the Printer Drivers
E2-30
2.8 Installing the Printer Drivers
2.8.1. Introduction
This manual describes how to install the TOSHIBA printer driver for the TOSHIBA B-SA4T bar code printer on
your Windows host computer; install and delete the printer driver, the procedure for adding the LAN port,
cautions and limitations. The appropriate version of the printer driver is V6.9.
2.8.2. General Description
(1) Features
Once you install the TOSHIBA printer driver on your Windows host computer, you can use the TOSHIBA
B-SA4T bar code printer, as well as the easy-to-use general printers.
You can use this printer by connecting a parallel interface cable (printer cable), a USB cable, or a LAN cable
to your host computer.
(2) System Requirements
To install the TOSHIBA printer driver on your host computer, the following system and environment are
required:
• Operating system: Windows 95, Windows 98, Windows Me, Windows NT4.0, Windows 2000,
Windows XP
• Hardware: A DOS-/V (IBM PC/AT compatible) machine running an above operating system.
• Interface: • Parallel interface conforming to the IEEE1284 standard
(Compatibility and ECP modes)
• USB interface (Ver1.1)
*1
• LAN interface (10BASE-T/100BASE-TX)
*1: Windows 95 and Windows NT4.0 do not support the USB connection.