Filter
Top Products
2. PRINTER SETUP
ENGLISH VERSION EO1-33062
2.6 Opening/Closing the Top Cover
E2- 5
2.6 Opening/Closing the
Top Cover
When opening or closing the Top Cover, please be sure to follow the
instructions below.
To open the Top Cover:
1. Turn the Cover Open Levers frontward, and gradually open the Top
Cover.
There are four positions for the Top Cover: OPEN position, Position 1,
Position 2, and CLOSE position. The Top Cover can be held at Position
1 or Position 2.
To hold the Top Cover at Position 1, fist open the Top Cover until the
Top Cover Support goes over Position 1 (c), then close the Top Cover a
little (d) to secure the Top Cover Support.
WARNING
!
1. To avoid injury, be careful
not to trap your fingers
while opening or closing
the cover.
2. When closing the Top
Cover, do not place your
hands or fingers between
the Top Cover and the
Lower Cover. The Top
Cover may free-fall, which
may cause injury.
CAUTION!
1. Be careful not to touch the
Print Head Element when
opening the Top Cover.
Failure to do this may
cause missing dots by
static electricity or other
print quality problems.
2. Do not forcibly close the
Top Cover while it is held a
t
Position 1 or Position 2.
Doing this could damage
the Top Cover Support.
Top Cover Support
Position 1
OPEN
2
1
CLOSE
Top Cover
Cover Open Lever
Cover Open Lever
OPEN position
Position 2
Position 1
CLOSE position